|
I love projects like this because it cost me almost nothing. I made it all from scraps that I had lying around. Cedar fence scraps made up the bulk of it.  Here's what you'll need:
 Click on the picture for bigger view of this project.
Cut the three bottom boards 4 3/4" X 27".  Align the bottom boards with about 1/8" space between each board. This will allow water to run out. Set one of the frames onto the bottom boards, center it, glue and screw it in place.  Mount the second frame on top of the bottom, centered, glued and screwed as above.  Now build the top by gluing and screwing the last frame onto the mitered top.  Glue and nail the side and end boards onto the bottom frame. The 5" boards go on the sides. Space them beyond the frame one board thickness on each end.  The two 4 11/16" boards go on the outside of the ends and the 2 1/2" goes in the middle. Put the top inside the side and end boards.  Glue and nail the side and end boards onto the top. That's it! It's pretty easy to build and really looks great. |
|
It's free, it's fun and it's packed full of woodworking projects, craft projects, computer tips, recipes and much more. Just click here to register today:  NOTE: Entering your email address does nothing more than add you to our subscriber list for our newsletter and future updates. Thank You, 
For Email Marketing you can trust
|