The RunnerDuck Plant Name Tags, step by step instructions.

Here's another one of those simple projects that look great and the results are especially fun for little kids. This simple little stool gives children a place to sit and join in with the adults when everyone is sitting around having a good time.

Here's what you'll need: 2" X 10" X 12" piece of Pine.
1" dowel 18" long.

Cut a heart shape out of the 2" X 10" piece of pine. Use a paper pattern for best results.
Drill three 1" holes in the bottom approximately 1 1/2" in from the edges and about half way through. For more stability you can drill these holes at a 10 degree angle but cutting feet level gets to be a little tricky.
Cut the 1" dowel into three equal pieces, approximately 6" long.
Glue the dowels into the base. Make sure they are seated good.
Route a radius around the top of the seat for a nice smooth edge.
Sand, stain and varnish. You can add some simple designs around the top to make it a little fancier.
That's it! Now have a party and invite that little person to join in.

Return to Projects

VISIT RunnerDuck HOME PAGE

Sign up for our monthly newsletter, The AllAmerican RunnerDuck Review!
It's free, it's fun and it's packed full of woodworking projects, craft projects, computer tips, recipes and much more. Just click here to register today:

NOTE: Entering your email address does nothing more than add you to our subscriber list for our newsletter and future updates.

Thank You,
Ken and Marilyn

For Email Marketing you can trust